据《世界能源新闻》伦敦报道，全球著名波动力研究公司以色列生态波浪发电公司（Eco Wave Power）日前从特拉维夫雅法市政当局获得了工程协调许可证(许可证号为2020-3249)，用于以色列雅法港的EWP-EDF One 波能项目的水泥工程和10个飘浮物的安装。
本许可证允许生态波浪发电公司在海边防浪堤进行项目的实际安装，其中应包括在港口内早先存在的30米长的具有10KW装机容量的防浪堤加固的水泥工程以及安装10个漂浮物，每个漂浮物的表面面积8.54平方米。所有的土木工程都由生态波浪发电公司的亚历克斯·格莱泽规划并监督，后者是一位有25年经验的土木工程师，为以色列铁路公司、以色列空军和以色列电力公司执行项目。
格莱泽说，“我参加了多个能源项目。如2012年以色列的495兆瓦的传统发电厂，2017年的以色列基利波山抽水蓄能水电项目，但生态波浪发电公司的波能技术绝对是我参与过的最独特和最具创新性的项目。我很高兴能参与这个项目，以安全可靠的方式监督土建工程的实施。”
格莱泽说，“我们很高兴地宣布这一里程碑，这是最终的工程协调许可证，使我们能够继续水泥工程和漂浮物的安装，并使我们向部署我们的第二个并网波浪能源发电站又迈进了一步。由于生态波浪发电技术的陆上性质，水泥工程和漂浮物安装将是简单的作业，不涉及任何船只、潜水员、水下电缆或水下系泊，这些都是众所周知的非常昂贵和复杂的作业。所有的工作都将在陆上进行，使用起重机等标准设备，因此，与海上解决方案相比，生态波浪发电技术的成本效益得到了加强。
李峻 编译自 世界能源新闻
原文如下：
Wave Power Projects Takes a Big Step
Eco Wave Power has secured the engineering coordination permit from the Municipality of Tel-Aviv Jaffa (permit number 2020-3249) needed for the cement works and installation of 10floaters for the EWP-EDF One wave energy project in the Port of Jaffa, Israel.
This permit allows Eco Wave Power to proceed with the actual installation of the project in the seaside of the breakwater, which shall include cement works for the breakwater’s reinforcement and the installation of 10 floaters, on 30 linear meters of a pre-existing breakwater within the port, having an installed capacity of 100 KW. Each floater will have a surface area of 8.54 square meters. All civil works were planned and will be supervised by Alex Gleizer, a civil engineer with 25 years of experience, executing projects for the I“I have taken part in multiple energy projects, such as a 495MW traditional power station in 2012 and a pumped storage hydroelectricity project in the Gilboa in Israel in 2017, but Eco Wave Power’s wave energy technology is definitely the most unique and innovative project that I have taken part in. I am very excited to take part in this project by supervising the execution of the civil works in a safe and reliable manner,” said Alex Gleizer.
sraeli Railway Company, the Israeli Air Force, and the Israeli Electric Company.
“We are delighted to announce this milestone, which is a final engineering coordination permit that enables us to continue with the cement works and floaters’ installation portion of our works, and is bringing us one step closer to deploying our second grid-connected wave energy power station. Due to the onshore nature of the Eco Wave Power technology, the cement and floaters installation works will be straightforward and will not involve any ships, divers, underwater cables or underwater moorings, which are known to be extremely expensive and complex. All works will be performed from the land side, using standard equipment such as cranes, thus reinforcing the cost-effectiveness of the Eco Wave Power technology, in comparison to offshore solutions,” said Inna Braverman, Founder and CEO of Eco Wave Power.
